Mercedes B0 Service Accurate Checklists and Cost

Written and Checked By:

3 minutes
Mercedes B0 Service

If you’re a Mercedes-Benz owner, you might notice the B0 service warning light on your dashboard. This warning demands a B0 service, a routine check that makes sure your car stays in smooth condition.

What is Mercedes B0 Service?

A B0 Mercedes service includes all the necessities of a Service B, such as changing the engine oil and oil filter, checking fluid levels, inspecting tires and brake components, replacing the cabin air filter, flushing and renewing brake fluid, and resetting the service indicator. And, B0 specifically focuses on flushing the brake fluid.

What is included in the Mercedes B0 service?

It might feel a bit intricate at first, but don’t worry—you’ll get the hang of it. This is your standard B service, along with one extra task, making it B0.

Here’s what you can expect during a B0 service:

1. Change Engine Oil and Oil Filter

Your engine gets a refreshing oil change during the B0 service, ensuring it runs on fresh, high-quality oil. Simultaneously, the oil filter is replaced, promoting proper lubrication and protection against wear and tear.

2. Fluid Levels

Vital fluids, including brake fluid, power steering fluid, coolant, and washer fluid, undergo a meticulous check and adjustment. Topping off these fluids to their recommended levels ensures optimal performance and system longevity.

3. Tire Inspection and Inflation

Each tire undergoes a careful inspection for signs of wear and tear. And, tire pressure is adjusted according to the manufacturer’s specifications.

4. Brake Components Inspection

A comprehensive examination of brake components, such as pads, discs, and rotors, is conducted. This thorough inspection secures the integrity of the braking system, and provides reliable and safe stopping power.

5. Replace Cabin Air Filter

The B0 service includes the replacement of the cabin air filter. This component filters out dust and allergens from the air inside your car.

6. Brake Flush and Fluid Renewal

Brake fluid undergoes a complete flush and renewal during the B0 service. This crucial step maintains optimal braking performance, ensuring efficient and reliable stops when needed.

7. Service Indicator Reset

Upon completing the B0 service, the service indicator is reset. This not only acknowledges the successful completion of the service but also keeps you informed about when the next service is due.

B0 Service Specific

8. Brake Fluid Flush

The B0 service includes an unusual brake fluid flush. Do not get confused with the brake fluid replacement. They have similarities but they are different.

A brake fluid change means draining a portion of the old fluid from the brake reservoir and refilling it with new fluid.

A brake fluid flush, on the other hand, is a more vast procedure that completely replaces the old fluid with new fluid using a pressurized flushing machine.

Mercedes B0 Service Cost

For a Mercedes B0 service, which typically includes a standard tune-up with an oil change and a comprehensive inspection, you can anticipate a cost ranging from $200 to $400. However, if additional tasks are identified or specific issues need attention, the overall cost might extend to approximately $400 to $700. For a precise estimate tailored to your B0 service needs, it’s advisable to consult with your Mercedes dealership or a trusted mechanic.

⚠ Next Maintenance Service Light
Mercedes B1 Service Information

Leave a Reply

Your email address will not be published. Required fields are marked *